1. HOME
  2. For Car
  3. R/C Systems
EXZES Z3
商品画像

Adapt M17S function to STICK Transmitter
Renew high end stick transmitter

■Indicator function installed
■Direct model select function renewed
■Quick Set Up Wizard replaced to inside model menu
■Changeable menu color
■Compatible with FH5/FH5U System
■LP1-2500 battery chargable by USB Type-C
■"MOTION STEERING" can operate steering by tilting EXZES ZIII.

■Installed great visibility TFT colors display (480 x 320)
■ LP1-2500 battery can be charged by USB type-C
*Type-C cable is not included.
*LP1-2500 is not compatible with USB PD (USB Power Delivery) and can not be charged by the USB PD devices.
■Compatible with Micro SDHC card can manage firmware update, model data, telemetry log dat.
*Please use SANWA micro SDHC card or micro SDHC card format FAT32.
■ PGS servos can be set by multi setting gear function to connect with transmitter.
■ Compatible with SSL CODE10 devices as PGS servos and SUPER VORTEX Gen2 PRO can be set by transmitter while driving.
■Easily set up car setting by QUICK SET UP WIZARD function.


Firmware: 1.00.02 (fixed minor bug of no operation alarm)
How to Update to Firmware 1.00.02 from 1.00.01
1. Download the firmware Ver. 1.01.02
EZ-Z3.zip ←click here to download
2. Please make "EZ-Z3" folder in root directory. Then, make "update" folder in EZ-Z3 folder
3. Save unzipped "EZ-Z3_firm_1.00.02.prg" and "EZ-Z3_lamg_ENG.res" in the "update" folder
(Attached file is already made a folder and you can put it into micro SDHC)
*SDHC card format should be FAT32
*1-2 process by using computer or smartphone
4. Insert the micro SD card to EXZES ZIII(Please take care of Micro SD direction)
5. Go to SYSTEM menu and choose SD-CARD
6. Click to FIRMWARE and enter [UPDATE]
7. Display "UPDATE OK?" and choose "YES"
8. Start Update and wait until finish
9. When finished update, will display "COMPLETE !"
10. EXZES ZIII firmware update is completed

* When inserting Micro SDHC card, please make sure direction of the Micro SD card.
　Please insert the Micro SD card slowly and push until making sound of insert.
　Then please check surely inserted the Micro SD card in the SD card slot of the transmitter.
　Taking off the Micro SD card while updating the Micro SD card is possible not to turn on the transmitter.
*When updated firmware and language files, please charge the transmitter fully before starting update.
*In case of the dropping voltage while updating, firmware update and language file update
　cannot be completed and it is possible not to turn on the transmitter.
*If the transmitter cannot be turned on while updating,
　please make contact with our distributor in your country.

●Dull-dot Color LCD(480ｘ320) ●Touch Pad ●Built-in Antenna●Feeling ●ST and TH tension adjuster ●Safety Link●Racing Mode ●Setup Wizard ●Dual Rate ●End Pint Adjust ●Anti-Lock Brake ●Servo Speed ●Offset ●Trim/Sub Trim ●Servo Reverse ●Curve ●Fail Safe ●Timer ●Lap ●CODE AUX ●Model Memory ●Model Name ●Model (Select/Copy/Clear/Sort) ●Direct Model Select ●RF Mode (FH5U, FH5) ●Response Mode (SXR/SUR/SSR/SHR/NOR) ●Bind ●Log(REC/RPM/VOLT/TLM1/TLM2/ST Point/TH Point/RX Mode/Reading Function) ●Servo Monitor ●Key Assign ●Vibrator ●AUX Type ●Trim Type ●TH Type ●Calibration ●Custom Menu ●Mechanical Rudder Angle Adjustment
●Compatible RX: Telemetry-compatible(RX-493i, RX-492i , RX-49T, RX-493, RX-492,RX-491)

page up