・AL case
・Compatible with SXR
・New Function: Quick-ST
・Compatible with setting by MULTI-SETTING GEAR
| Dimensions | 27.6 x 22.6 x 8.0 mm |
||
| Weight | 11.4 g |
||
| Voltage | 3.7 - 7.4 V |
||
【Additional Explanation for using MULTI
SETTING GEAR】
SGS-02 can be set by MULTI SETTING GEAR.
MULTI SETTING GEAR default firmware is for PGS-LH/XB/XR.
Please update firmware before setting.
*Please use firmware for PGS-HR when using for SGS-02.
*in case of not changing compatible firmware, display
will show model is different.
【How to change MULTI SETTING GEAR】
1. Download each firmware in the below link
2. Unzip
the download folder and save program to Micro SDHC Card
3.
Insert Micro SDHC Card to MULTI SETTING GEAR
4. Turn
on MULTI SETTING GEAR holding with BACK button
5.
Choose correct firmware for your servo and press ENTER button
6. Turn
off the MULTI SETTING GEAR
7. After
connected your servo, turn on the MULTI SETTING GEAR again.
8. Start
setting
※If the
firmware is not correct. display "PLEASE CHANGE."
Please
back to 5. and choose correct firmware.
【Online Manual】
