1. HOME

M12/EXZES-Z setting Tips

Sanwa M12/EXZES-Z setting Tips

We would like to inform the setting tips of M12/ EXZES-Z to allow you to use it in best performance.

VisualM12_700

1. Receiver and MODULATION

"SYSTEM > BIND > MODULATION > ***"

To use the best performance, we strongly recommend to using the FH4 receiver like RX 471/471WP/461/462.

The setting of modulation should be FH4T.

* Manual page 30.

 

2. SERVO MODE

"SYSTEM > BIND > CH * > ***"

To get the best response, you should set the SERVO MODE to "SSR".

*Please note that "SSR" mode require to use SRG servos.

For ESC, please set the servo mode of CH2 ( TH ) to SHR.

*Our new ESC "Super Vortex Zero" is able to handle SSR.

*Attention : You need to set the SERVO MODE before BIND

* Manual page 32.

 

3. FEELING

"SETUP > FEELING > ST/TH > *** "

We recommend to set the "FEELING" parameter to "5S" ( Fastest response ).

For your reference, the parameter of "0″ allow you to feel similar response of M11X.

To get in to the extremely fast response of M12, you can start from " 0 " then try to move to "5S" by your step.

If you feel " 5S " is too fast or too sensitive, we can recommend to use "Speed" function rather than adjust by " Feeling ".

* Manual page 69.

 

4. Other Setting Tips

 

a) Telemetry

" SYSTEM > BIND > TELEMETRY > ON / OFF "

Please set the TELEMETRY function to OFF in the Official race.

In general practice, you can use telemetry and it allows you to know the battery voltage, RPM, Temperature on the car in real time.

* Manual page 31.

 

b) SAFETY LINK

" SYSTEM > BIND > SAFETY LINK > *** "

SAFETY LINK function allows you to avoid the problem by driving the car with different model setting. RX will only work when receive the signal with memorized SAFETY LINK number when you did BIND.

* Manual page 31.

 

c) VR ADJUST

"SYSTEM > VR ADJUST "

You can re-adjust the CENTER and TRAVEL of Steering / Throttle / Lever by this function. If you found the miss alignment on Steering / Throttle / Lever, please adjust it by using this menu.

* Manual page 45.

page up