1. HOME

MT-44 Updated Programming Software (Ver.1.01.18)

Thank you for your purchase of MT-44.


Please be informed that MT-44 updated programming software is available.

  【How to update firmware】

Please download the version update program from the below link;

MT-44_Ver.1.01.18.zip

1.Decompress the file.
2.Insert micro SD card into your PC.
3.Make the new folder named "MT-44" in the root of micro SD card.
4 Make the new folder named "update" in the above "MT-44" folder.
5.Copy and Paste the decompressed file "MT-44.prg" into the above "update" folder.
6.Remove micro SD card from your PC and insert it into MT-44 with MT-44 off.
7.Power on MT-44. And update the software as the following process.

SYSTEM > FIRMWARE > FIRMWARE [UPDATE]
In the firmware menu, both the current version and new version will be displayed.
*After updating the firmware, you cannot go back to the old firmware.


MT-44 Software Update Record

Ver.1.01.18=========================================================


-Debug for AUX CODE10


Ver.1.01.17=========================================================

-Correction for bug of custom menu function

Ver.1.01.16=========================================================

-Addition about usable characters of USER NAME on CODE AUX function

-Correction for bug of POINT AUX function

-Correction for bug of R-MODE function


Ver.1.01.15==============================================================

-Correction for bug of Speed function


Ver.1.01.14==============================================================

-Correction for Indication of Calendar


Ver.1.01.13==============================================================

-Correction for bug of clock setting funcion 


Ver.1.01.11==============================================================

-Improvement for indication of telemetry log data

-Correction for bug of clock setting funcion 


Ver.1.01.10==============================================================

-Correction for error check function


Ver.1.01.09==============================================================

-Correction for indication of battery remaining amount

-Correction for indication of telemetry menu


Ver.1.01.08==============================================================

-Correction for bug of power switch operation


Ver.1.01.07==============================================================

-Correction for bug of power turning-on 


Ver.1.01.06==============================================================

-Correction for bug of updating telemetry max hold value

-Make toggle operation of KEY ASSIGN SW1/SW2 memorize while being also power off 

-Addition of the line to indicate ST/TH neutral position on telemetry graph indication


Ver.1.01.05==============================================================

-Inprovement for telemetry alarm operation

-Correction for bug of telemetry screen and TL2 alarm indication


Ver.1.01.04==============================================================

-Revision for telemetry setting and temperature setting value specification

-Correction for bug of telemetry setting and RPM initial value setteing operation

-Correction for bug of BUZZER setting and TLM2-ALERT operation 

-Correction for bug of telemetry screen indication 

-Correction for bug of clock menu indication 


Ver.1.01.03==============================================================

- 1st release

page up