1. HOME
  2. For Car
  3. Servos
Servo

PGS-XR

商品画像

●SSL-COMPATIBLE PROGRAMMABLE SERVO
# Compatible with CODE 10 (M12S, EXZES ZZ, MT-44)
Not Compatible with CODE 5 (M12, EXZES Z, MT-4S, MT-4, MT-S)
●PGS SETTING GEAR-COMPATIBLE
●SUPER RESPONSE (SSR) MODE-COMPATIBLE
●HIGH RESPONSE (SHR) MODE-COMPATIBLE
●Li-Po 2 CELL-COMPATIBLE
●HIGH SPEED TYPE
●BRUSH LESS MOTOR
●FULL ALUMINUM CASE
●FULL METAL GEAR (Strengthening Gears)
●AL HEAT SINK

Speed

0.09 sec/60° (7.4V)
0.11 sec/60° (6.0V)

Torque

17.3 kg●cm (7.4V)
14.0 kg●cm (6.0V)

Dimensions

40.2 x 20.5 x 38.7mm

Weight

72.0g

●Programmable Servo to be compatible with SSL & Telemetry at Launch
●Setting Adjustment by wireless from Radio
●Setting Adjustment to connect Servo with Setting Gear
●Regarding Temperature, Current, Voltage and Volume Position on Servo inside,
Telemetry-transmission can be passed to Radio.
# Initial Setting on Setting Gear is necessary.


★Setting Items
●SSL-CH (SSL Channel Setting) ●STRETC (Stretcher Adjustment) ●BOOST (BOOST Adjustment)
●D-Band (Dead Band Adjustment) ●MV-MID (Middle Torque Adjustment)
●MV-END (Later Torque Adjustment) ●BREAK (Break Adjustment)
◎MV-HOLD (Power Adjustment at whole area) ◎MV-FRQ (Feeling Adjustment at whole area)
◎MAX-PW (MAX Duty Adjustment)
※ Setting Gear is necessary for ◎setting.

●PGS-Servo Explanation

●PGS-XR Latest Firmware Information

PGS-XR_P5101307.zip ←Click Here for download


6/DEC/2018 V51.01R307 P5101307.PRO
●Bug fix about servo will not work rarely because misread response mode when turning on.


【Notice】
※The firmware cannot use with PGS-LH,XB,LH TYPE D.
  DO NOT update to the firmware with the PGS servos. 


【How to update】
1.Insert Micro SD card to your computer and save unzip file (P5101306.PRO) to root in Micro SD card. 

2.Insert Micro SD card to Multi Setting Gear and connect PGS-LH to Multi Setting Gear, then turning on the Gear.

3.If the Gear display "SERVO CONNECT OK?," press back key 3 times and display"SETTING GEAR FOR PGS-LH/XB/XR."

※If the display show "SETTING GEAR FOR PGS-CL/CX," it need to switch Multi Setting Gear Firmware for PGS-LH/XB/XR. 
Please check how to change Multi Setting Gear firmware on our website. 
(http://sanwa-denshi.com/rc/car/option2/multi_setting_gear.html) 

4.Move to "SERVO PROGRAM UPDATE [3]" by ▲SELECT▼ key and press Enter key. 

5.Select update file "P5101307" by ▲SELECT▼ key and press Enter to start update. 
(Firmware update will be finished for about 10 seconds after press enter.)

6.After update is completed, please move to "INFORMATION (VERSION)[4]" and enter to check "PGS:V51.01R307."

PGS-XR & XR II dimension.jpg
page up