1. HOME
  2. For Car
  3. Servos
Servo

PGS-HR

商品画像

●FH5U: SXR(SANWA XTREME RESPONSE) MODE-COMPATIBLE
●SSL-COMPATIBLE PROGRAMMABLE SERVO
# Compatible with CODE 10 (M12S, EXZES ZZ, MT-44)
Not Compatible with CODE 5 (M12, EXZES Z, MT-4S, MT-4, MT-S)
●PGS SETTING GEAR-COMPATIBLE
●Specialized for 1/12 models
●LiPo (1 & 2cell) Battery Support
●Digital Servo
●Coreless Motor
●Full metal gear

Speed

0.10 sec / 60° (6.0 V)
0.16 sec / 60° (3.7 V)

Torque

3.8 kg・cm (6.0 V)
5.8 kg・cm (3.7 V)

Dimensions

27.0 x 21.1 x 30.5 mm

Weight

24 g

●Programmable Servo to be compatible with SSL & Telemetry at Launch
●Setting Adjustment by wireless from Radio
●Setting Adjustment to connect Servo with Setting Gear
●Regarding Temperature, Current, Voltage and Volume Position on Servo inside,
Telemetry-transmission can be passed to Radio.
# Initial Setting on Setting Gear is necessary.


★Setting Items
●SSL-CH (SSL Channel Setting) ●STRETC (Stretcher Adjustment) ●BOOST (BOOST Adjustment)
●D-Band (Dead Band Adjustment) ●MV-MID (Middle Torque Adjustment)
●MV-END (Later Torque Adjustment) ●BREAK (Break Adjustment)
◎MV-HOLD (Power Adjustment at whole area) ◎MV-FRQ (Feeling Adjustment at whole area)
◎MAX-PW (MAX Duty Adjustment)
※ Setting Gear is necessary for ◎setting.
●PGS-Servo Explanation

Multi-Setting Gear Firmware for PGS-HR

1. Please download Multi-Setting Gear Firmware for PGS-HR. 
Firmware: 

2. Unzip the download folder and save program to Micro SDHC Card

3. Insert Micro SDHC Card to MULTI SETTING GEAR

4. Turn on MULTI SETTING GEAR holding with BACK button

5. Choose correct firmware for your servo and press ENTER button

6. Turn off the MULTI SETTING GEAR

7. After connected your servo, turn on the MULTI SETTING GEAR again. 

8. Start setting 

※If the firmware is not correct. display "PLEASE CHANGE."

Please back to 5. and choose correct firmware. 

Download firmware for PGS-HR.
GEA11108.PRO

Also, we upload Firmware change manual with picture. 

Please check manual in the below.

MULTI SETTING GEAR FIRMWARE CHANGE MUNUAL.pdf

page up